ImageStream Router Documentation - Recent changes [en]

Router Manuals/003

2010-09-08T21:15:19Z

Connections using optional cards:

←Older revision		Revision as of 21:15, 8 September 2010
(2 intermediate revisions not shown.)
Line 230:		Line 230:

	===Router Connections===		===Router Connections===
-	Console port connection:	+	====Console port connection====
	#Connect the included RJ-45 to DB9 serial adapter to the PacketMate’s console port.		#Connect the included RJ-45 to DB9 serial adapter to the PacketMate’s console port.
	#Attach the DB9 serial connection to your computer's NULL MODEM cable.		#Attach the DB9 serial connection to your computer's NULL MODEM cable.
	#Configure the computer serial port baud irate to 9600 with bits/parity/stop settings of 8/N/1.		#Configure the computer serial port baud irate to 9600 with bits/parity/stop settings of 8/N/1.

-	Connecting the front panel Eth0 port:	+	====Connecting the front panel Eth0 port====
	#Connect a Cat5 cross over cable to the PacketMate’s Eth0 port.		#Connect a Cat5 cross over cable to the PacketMate’s Eth0 port.
	#Connect the opposite end of the cross over cable to another network connecting device.		#Connect the opposite end of the cross over cable to another network connecting device.
Line 251:		Line 251:
	\|}		\|}

-	Connections using front panel Ethernet ports:	+	====Connections using front panel Ethernet ports====
	#Connect the RJ-45 patch cable to the PacketMate’s Ethernet port.		#Connect the RJ-45 patch cable to the PacketMate’s Ethernet port.
	#Connect the opposite end of the patch cable to another network device (router, switch, server, computer, etc.) through its Ethernet port.		#Connect the opposite end of the patch cable to another network device (router, switch, server, computer, etc.) through its Ethernet port.

-	Connections using optional cards~~:<br />~~	+	====Connections using optional cards====
	Copper LAN Cards		Copper LAN Cards
	#Connect the RJ-45 patch cable to the LAN port.		#Connect the RJ-45 patch cable to the LAN port.
	#Connect the opposite end of the patch cable to another network device (router, switch, server, computer, etc.) through its Ethernet port.		#Connect the opposite end of the patch cable to another network device (router, switch, server, computer, etc.) through its Ethernet port.
		+

	Fiber LAN Cards		Fiber LAN Cards
Line 265:		Line 266:
	##Determine the type of connector used in the equipment.		##Determine the type of connector used in the equipment.
	#Connect the opposite end of the patch cable to another network device (router, switch, server, computer, etc.) through its Ethernet port.		#Connect the opposite end of the patch cable to another network device (router, switch, server, computer, etc.) through its Ethernet port.
		+
		+	{\| border="1"
		+	\|-
		+	!Note
		+	\|''For more information on types of fiber connectors refer to http://en.wikipedia.org/wiki/Optical_fiber_connector#Types.''
		+	\|}<br />
		+
	WAN Cards		WAN Cards
	#Connect the RJ-48 patch cable to the WAN port.		#Connect the RJ-48 patch cable to the WAN port.
Line 270:		Line 278:
	##With DS3/E3, connect the Tx on the optional card to the Rx on the network device and the Rx on the optional card, to the Tx on the network device..		##With DS3/E3, connect the Tx on the optional card to the Rx on the network device and the Rx on the optional card, to the Tx on the network device..
	#Connect the opposite end of the patch cable to another network device.		#Connect the opposite end of the patch cable to another network device.
		+

	Serial WAN Cards		Serial WAN Cards
Line 276:		Line 285:
	##With DS3/E3, connect the Tx on the optional card to the Rx on the network device and the Rx on the optional card, to the Tx on the network device..		##With DS3/E3, connect the Tx on the optional card to the Rx on the network device and the Rx on the optional card, to the Tx on the network device..
	#Connect the opposite end of the patch cable to another network device.		#Connect the opposite end of the patch cable to another network device.
		+

	Voice Cards		Voice Cards
	#Connect the RJ-45 patch cable to the voice card port.		#Connect the RJ-45 patch cable to the voice card port.
	#Connect the opposite end of the patch cable to another network device.		#Connect the opposite end of the patch cable to another network device.
		+

	USB port connections:		USB port connections:

Router Manuals/004

2010-09-08T21:11:05Z

Router Connections:

(Difference between revisions)

Special:Log/upload

2010-09-08T17:48:25Z

uploaded "Image:Router 1400 Rear.jpg"

Special:Log/upload

2010-09-08T17:48:04Z

uploaded "Image:GDC 1400 Front.jpg"

Router Manuals/003

2010-09-08T17:03:45Z

Manual Organization:

←Older revision		Revision as of 17:03, 8 September 2010
Line 16:		Line 16:
	This manual describes how to operate and configure your PacketMate 1300 Router system to meet various operating requirements. It is divided into four chapters, with each chapter addressing the basic concept and operation of this system.		This manual describes how to operate and configure your PacketMate 1300 Router system to meet various operating requirements. It is divided into four chapters, with each chapter addressing the basic concept and operation of this system.

-	Chapter 1: Introduction and Specifications. This section an overview of the PacketMate ~~1000~~ Route.	+	Chapter 1: Introduction and Specifications. This section an overview of the PacketMate 1300 Route.

	Chapter 2: Installation and Setup. This chapter unpacking instructions and installation procedures.		Chapter 2: Installation and Setup. This chapter unpacking instructions and installation procedures.

Router Manuals/004

2010-09-08T17:03:20Z

New page: =PacketMate 1400 Router= ==Preface== ===Scope of this Manual=== This manual describes how to install and operate the PacketMate 1400 Router. The information contained in this manual has ...

New page

=PacketMate 1400 Router=

==Preface==

===Scope of this Manual===
This manual describes how to install and operate the PacketMate 1400 Router. The information contained in this manual has been carefully checked and is believed to be entirely reliable. However, as General DataComm improves the reliability, function, and design of their products, it is possible that information may not be current. Contact General DataComm if you require updated information for this or other General DataComm products.

General DataComm, Inc. 
Network Access Division 
Technical Publications Department 
Park Road Extension 
Middlebury, Connecticut, USA 06762-1299 
Tel: 1 203 758 1811 Toll Free: 1 800 794 8246 

===Manual Organization===
This manual describes how to operate and configure your PacketMate 1400 Router system to meet various operating requirements. It is divided into four chapters, with each chapter addressing the basic concept and operation of this system.

Chapter 1: Introduction and Specifications. This section an overview of the PacketMate 1400 Route.

Chapter 2: Installation and Setup. This chapter unpacking instructions and installation procedures.

Chapter 3: Operation Information. This section provides illustrations and information on the system architecture and how to optimize its performance.

Chapter 4: This section describes BIOS settings.

===Safety Information===
This manual should be read in its entirety and all procedures completely understood before installing or operating the unit. The notes that appear throughout this manual must be read prior to any installation or operating procedure. Examples of notes used in this manual are shown below.

{| border="1"
|-
!Note
|''Indicates a note. It is something you should be particularly aware of; something not readily apparent. A note is typically used as a suggestion.''
|} 

{| border="1"
|-
!Important
|''Indicates an emphasized note. It is something you should be particularly aware of; something not readily apparent. Important is typically used to prevent equipment damage.''
|} 

The CAUTION, WARNING, and DANGER statements that appear throughout this manual are intended to provide critical information for the safety of both the service engineer and operator. These statements also enhance equipment reliability. The following definitions and symbols for CAUTION, WARNING, and DANGER as they are used comply with ANSI Z535.2, American National Standard for Environmental and Facility Safety Signs, and ANSI Z535.4, Product Safety Signs and Labels, issued by the American National Standards Institute.

[[Image:Safety_Symbols.jpg|700px|]] 

====Safety Guidelines====
Always use the following guidelines when unsafe conditions exist or when potentially hazardous
voltages are present: 

*Always use caution and common sense.
*Repairs must be performed by qualified service personnel only.
*To reduce the risk of electrical shock, do not operate *equipment with the cover removed.
*Never install telephone jacks in a wet location unless the jack is designed for that location.
*Never touch uninsulated telephone wires or terminals unless the telephone line is disconnected at the network interface.
*Never install telephone wiring during an electrical storm.

====Antistatic Precautions====
Electrostatic discharge (ESD) results from the buildup of static electricity and can cause computer components to fail. Electrostatic discharge occurs when a person whose body contains a static buildup touches a computer component. This product may contain static-sensitive devices that are easily damaged. Proper handling, grounding and precautionary ESD measures are essential when installing parts or cards. Keep parts and cards in antistatic packaging when not in use or during transport. If possible, use antistatic floorpads and workbench pads.

When handling components, always use an antistatic wrist strap connected to a grounded equipment frame or chassis. If a wrist strap is not available, periodically touch an unpainted metal surface on the equipment. Never use a conductive tool, like a screwdriver or a paper clip, to set switches.

===FCC and Canada Compliance===
Refer to the individual product card manuals for Compliance information.

===Part 15 Compliance===
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference and
2. This device must accept any interference received, including interference that may cause undesired operation.

===Electromagnetic Compatibility===
This Class A digital apparatus complies with Canadian ICES-003.

===La Compatibilité d’ Eléctro-magnetique===
Cet appareil numerique de la classe A est conforme a la norme NMB-003 du Canada.

===Service Support and Training===
VITAL Network Services, a General DataComm company, is committed to providing the service support and training needed to install, manage, and maintain your GDC equipment. VITAL Network Services provides hands-on training courses through VITAL Network Services Global Technology Training Services. Courses range from basic data communications, modems and multiplexers, to complex network and ATM systems. Training courses are available at our centers in the US, UK, France, Singapore and Mexico, as well as at a customer’s site.

For more information on VITAL Network Services or for technical support assistance, contact VITAL Network Services at:

VITAL Network Services World Headquarters 
6 Rubber Avenue 
Naugatuck, Connecticut 06770 USA 

http//www.vitalnetsvc.com 
[[Image:GDC_Regional_Sales.jpg|500px|]] 

==Chapter 1: Introduction and Specifications==

===Overview===
The PacketMate 1400 Router is GDC's entry level router for DS3/E3, BGP, and demanding Ethernet applications. The router provides a 1U 19-inch steel rackmount chassis with embedded main board, high-performance memory, reliable flash storage, six 10/100/1000 Ethernet ports, and two PCI expansion slots.

The PCI expansion slots accept Industrial Series network cards with Ethernet, sync serial, T1/E1, DS3/E3, analog FXO/FXS, BRI, PRI, and 56K dial-up interfaces. With these add-on cards, the PacketMate can connect different data and voice networks using a wide range of communications standards.

The base PacketMate is guaranteed to route two DS3/E3 circuits at wire speed, 16 T1/E1 circuits at wire speed, or more than 100 Mbps full duplex with 64-byte packets over Ethernet. With the optional CPU upgrade, the PacketMate can deliver up to 70% higher Ethernet throughput with VoIP traffic, and over 6 Gbps aggregate or 3 Gbps full duplex with large packets.

[[Image:GDC_1400_Front.jpg|700px|]] 

[[Image:Router_1400_Rear.jpg|730px|]] 

===Specifications===
====Hardware====
Chassis: Steel 1U 19" rackmount 
Processor: LGA 775 1.60 GHz Intel Celeron 
Memory: 256 MB SDRAM 
Storage: Fixed flash disk 
Network Ports: (6) 10/100/1000 Ethernet 
Management Port: Serial console 
USB: (2) USB 2.0 ports 
Expansion Interface: (2) 32-bit 33 MHz PCI slots 

====Power Supply====
Design: PFC 
AC Mains Voltage: 100 to 240 VAC 
AC Mains Frequency: 50 to 60 Hz 
Power Output: 250 W 

====Dimensions====
Height: 1.75 inches (44 mm) 
Width: 19 inches (483 mm) 
Depth: 15.25 inches (387 mm) 
Weight: 13.8 lbs. (6.3 kg) 
Shipping Weight: 20.2 lbs. (9.2 kg) 

====Options====
CPU: LGA 775 Intel Core2 Dual-Core CPU upgrade 
Memory: 512 MB, 1 GB, 2 GB or 4 GB DDR2 533/667 DIMM 
LAN Cards: 1, 2, and 4-port gigabit Ethernet 

WAN Cards: 1 and 2-port DS3/E3 or HSSI 
::1-port ATM DS3/E3 
::1-port channelized DS3 
::1, 2, 4 and 8-port serial, T1 or E1 
::1-port basic rate ISDN (BRI) 
::1-port 56 K modem 

Voice Cards: 1 to 4-port FXO/FXS 
::1, 2 & 4-port ISDN BRI 
::1, 2 & 4-port T1/E1 PRI 

Hard Drive Option: 80 GB

Power Supply Option: -48 V DC

==Chapter 2: Installation and Setup==

===Overview===
The PacketMate 1400 Router is pre-assembled, tested, and ready for use. This chapter provides procedures for installing the unit, power connections, the product cards, and finally, making system connections. If this is your first installation, you should be familiar with Chapter 1, Introduction and Specifications , for a better understanding of the features and use of the unit in your network.

===Unpacking Instructions===
The unit components are shipped in shock-absorbent packing within a corrugated box. Remove each component from the box and perform a thorough visual inspection. If damage has occurred to any component, contact the shipper immediately. All damaged
components must be retained until an inspection by the shipper has been completed. If it is necessary to re-package and return the unit, use the original packing materials and box.

===Installation Procedures===
====Unpacking The Router====
This section describes the installation of the PacketMate 1300 Router and it’s standard equipment. It does not describe the configuration or other details of specific plug-in product cards UAS family products that it houses; for that information, refer to Related Publications on page ii.
*External devices are connected to the router through standard connectors ports which are located on the front panel of the router and the ports on optional cards located on the rear panel.
*Place the unit in a ventilated area where the ambient temperature does not exceed 104oF (40oC).
*Do not install the unit directly above equipment that generates a large amount of heat (such as power supplies).

Router Manuals

2010-09-08T17:00:05Z

Router Manuals:

←Older revision		Revision as of 17:00, 8 September 2010
Line 2:		Line 2:
	#[[Router_Manuals/001 \| PacketMate 1000]]		#[[Router_Manuals/001 \| PacketMate 1000]]
	#[[Router_Manuals/003 \| PacketMate 1300]]		#[[Router_Manuals/003 \| PacketMate 1300]]
		+	#[[Router_Manuals/004 \| PacketMate 1400]]

Router Manuals/003

2010-09-08T16:58:42Z

SuperIO Device:

(Difference between revisions)

Special:Log/upload

2010-09-08T15:04:26Z

uploaded "Image:BIOS Setup 1300.png"

Special:Log/upload

2010-09-08T15:04:04Z

uploaded "Image:BIOS Peripherals 1300.png"

Special:Log/upload

2010-09-08T15:03:48Z

uploaded "Image:BIOS Main 1300.png"

Special:Log/upload

2010-09-08T15:03:27Z

uploaded "Image:BIOS Keys 1300.png"

Special:Log/upload

2010-09-08T15:03:07Z

uploaded "Image:BIOS IDE 1300.png"

Special:Log/upload

2010-09-08T15:02:22Z

uploaded "Image:BIOS Features 1300.png"

Special:Log/upload

2010-09-08T15:01:46Z

uploaded "Image:BIOS Date 1300.png"

Router Manuals/003

2010-09-08T14:59:25Z

Start up:

←Older revision		Revision as of 14:59, 8 September 2010
(2 intermediate revisions not shown.)
Line 293:		Line 293:
	#Remove the top lid from the base.		#Remove the top lid from the base.

-	[[Image:\|~~700~~\|]]<br />	+	[[Image:Router_1300_Screws.jpg\|700px\|]]<br />
-	[[Image:\|~~700~~\|]]<br />	+	[[Image:Router_1300_Lid.jpg\|500px\|]]<br />
-	[[Image:\|~~700~~\|]]<br />	+	[[Image:Router_1300_Interior.jpg\|500px\|]]<br />
		+
	===CPU Location===		===CPU Location===

-	[[Image:\|~~700~~\|]]<br />	+	[[Image:Router_1300_CPU.jpg\|600px\|]]<br />

	===RAM Slot Location===		===RAM Slot Location===

-	[[Image:\|~~700~~\|]]<br />	+	[[Image:Router_1300_RAM.jpg\|600px\|]]<br />


	===Compact Flash Location===		===Compact Flash Location===

-	[[Image:\|~~700~~\|]]<br />	+	[[Image:Router_1300_CF.jpg\|600px\|]]<br />

	===Battery Location===		===Battery Location===
-	[[Image:\|~~700~~\|]]<br />	+	[[Image:Router_1300_Battery.jpg\|600px\|]]<br />

	===Battery Exchange===		===Battery Exchange===
-	1. Press the metal clip back to eject the button battery.	+	#Press the metal clip back to eject the button battery.
-	2. Replace it with a new one by pressing the battery with fingertip to restore the battery	+	[[Image:Router_1300_Battery2.jpg\|400px\|]]<br />
-		+	#Replace it with a new one by pressing the battery with fingertip to restore the battery
		+	[[Image:Router_1300_Battery3.jpg\|400px\|]]<br />
	===Power Supply Location===		===Power Supply Location===
-	[[Image:\|~~700~~\|]]<br />	+	[[Image:Router_1300_PS.jpg\|600px\|]]<br />

	===Hard Drive Location===		===Hard Drive Location===
-	[[Image:\|~~700~~\|]]<br />	+	[[Image:Router_1300_HD.jpg\|600px\|]]<br />


Line 334:		Line 336:
	The BIOS setup/utility uses a key-based navigation system called hot keys. Most of the		The BIOS setup/utility uses a key-based navigation system called hot keys. Most of the
	BIOS setup utility hot keys can be used at any time during the setup navigation process.		BIOS setup utility hot keys can be used at any time during the setup navigation process.
		+
		+	Main Menu
		+	Once you enter Award BIOS CMOS Setup Utility, the Main Menu (as figure below) will appear on the screen. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.
		+
		+
		+
		+	Note
		+	Please Load Optimized Defaults in the BIOS when somehow the system works not stable as usual. This action makes the system reset to the default for stability.
		+
		+
		+	Standard CMOS Setup Menu
		+	This setup page includes all the items in standard compatible BIOS.
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+	Date
		+	The date format is <week>, <month>, <day>, <year>.
		+	Week The week, from Sun to Sat, determined by the BIOS and is display only
		+	Month The month, Jan. Through Dec.
		+	Day The day, from 1 to 31 (or the maximum allowed in the month)
		+	Year The year, from 2003 through 2098
		+
		+
		+
		+	Time
		+	The times format in <hour> <minute> <second>. The time is calculated base on the 24-
		+	hour military-time clock. For example, 1 p.m. is 13:00:00.
		+
		+	IDE Channel 0 Master, Slave
		+	IDE HDD: Auto-Detection Press "Enter" to select this option for automatic device detection.
		+	IDE Device Setup.: You can use one of three methods:
		+	Auto Allows BIOS to automatically detect IDE devices during POST(default)
		+	None Select this if no IDE devices are used and the system will skip the
		+	automatic detection step and allow for faster system start up.
		+	Manual User can manually input the correct settings
		+	Access Mode: Use this to set the access mode for the hard drive. The four options are: CHS/LBA/Large/Auto(default:Auto)
		+	Capacity: Capacity of currently installed hard disk. Hard drive information should be labeled on the outside drive casing. Enter the appropriate option based on this information.
		+	Cylinder: Number of cylinders
		+	Head: Number of heads
		+	Precomp: Write precomp
		+	Landing Zone: Landing zone
		+	Sector: Number of sectors
		+	Memory
		+	The category is display-only which is determined by POST (Power On Self Test) of the
		+	BIOS.
		+	Base Memory
		+	The POST of the BIOS will determine the amount of base (or conventional) memory installed in the system. The value of the base memory is typically 512K for systems with 512K memory installed on the motherboard.
		+	Extended Memory
		+	The BIOS determines how much extended memory is present during the POST. This is the amount of memory located above 1 MB in the CPU's memory address map.
		+	Total Memory
		+	This item displays the memory size that used
		+
		+
		+	BIOS Features Setup
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+	Hard Disk Boot Priority
		+	Select boot sequence
		+	Use < > or < > to select a device, then press<+> to move it up, or <-> to move it down the list. Press <ESC> to exit this menu.
		+
		+	Hyper-Threading Technology
		+	Enabled Enables CPU Hyper Threading Feature. Please note that this feature is only working for operating system with multi processors mode supported. (Default value)
		+	Disabled Disables CPU Hyper Threading.
		+
		+	Virus Warning
		+	Allow you to choose the virus warning feature for IDE Hard Disk boot sector protection.
		+
		+	Cache Setup
		+	CPU L1 & L2 Cache (Enabled or Disabled CPU L1 and L2 cache)
		+
		+	Quick Power On Self Test
		+	This category speeds up Power On Self Test (POST) after you power up the computer.
		+	If it is set to Enable, BIOS will shorten or skip some check items during POST.
		+
		+	Boot Up Num Lock Status
		+	Select power on state for Num Lock.
		+
		+	Console Redirection
		+	Set the UNIX Console redirect to the terminal from COM1. The choice: Enabled/Disabled.
		+
		+	Baud Rate
		+	Set the RS-232 baud rate speed. The choice: 9600, 19200, 38400, 57600 and 115200.
		+
		+	Integrated Peripherals
		+
		+	On Chip IDE Device
		+	Allow you can change IDE setting and SATA setting.
		+
		+	Allow you to disable or enable Primary /Secondary IDE, you can set the IDE PIO mode
		+	and Ultra DMA mode
		+	On-Chip Serial ATA setting can let you change Serial ATA mode, you can find option
		+	“ Disalbe”; “Auto”, “Combined Mode”; ”Enhanced Mode”,”SATA only”.
		+	RAID function, must change SATA Mode to RAID here.
		+
		+	Onboard Device
		+	Allow you to enable or disable USB Controller, USB 2.0 Controller, USB Keyboard and USB Mouse Support
		+
		+	SuperIO Device
		+	Allow you to change SuperIO setting in this sub menu

Special:Log/upload

2010-09-08T14:04:34Z

uploaded "Image:Router 1300 Screws.jpg"

Special:Log/upload

2010-09-08T14:04:08Z

uploaded "Image:Router 1300 RAM.jpg"

Special:Log/upload

2010-09-08T14:03:25Z

uploaded "Image:Router 1300 PS.jpg"

Special:Log/upload

2010-09-08T14:03:11Z

uploaded "Image:Router 1300 Lid.jpg"

Special:Log/upload

2010-09-08T14:02:58Z

uploaded "Image:Router 1300 Interior.jpg"

Special:Log/upload

2010-09-08T14:02:40Z

uploaded "Image:Router 1300 HD.jpg"

Special:Log/upload

2010-09-08T14:02:27Z

uploaded "Image:Router 1300 CPU.jpg"

Special:Log/upload

2010-09-08T14:02:14Z

uploaded "Image:Router 1300 CF.jpg"

Special:Log/upload

2010-09-08T14:01:54Z

uploaded "Image:Router 1300 Battery3.jpg"

Special:Log/upload

2010-09-08T14:01:39Z

uploaded "Image:Router 1300 Battery2.jpg"

Special:Log/upload

2010-09-08T14:01:21Z

uploaded "Image:Router 1300 Battery.jpg"

Router Manuals/003

2010-09-08T13:55:21Z

Router Connections:

←Older revision		Revision as of 13:55, 8 September 2010
(One intermediate revision not shown.)
Line 286:		Line 286:
	#Connect the male standard A end of the UBS cable to the PacketMate’s UBS port.		#Connect the male standard A end of the UBS cable to the PacketMate’s UBS port.
	#Connect the opposite end of the UBS cable to another device.		#Connect the opposite end of the UBS cable to another device.
-	[[Image:~~LAn_POrt~~.jpg]]<br />	+	[[Image:UBS_Connectors.jpg]]<br />
		+
		+	==Chapter 3: Operations Information==
		+	===Open the Chassis===
		+	#To remove the top lid, loosen the 6 screws of the chassis, two on each side and two on the back.
		+	#Remove the top lid from the base.
		+
		+	[[Image:\|700\|]]<br />
		+	[[Image:\|700\|]]<br />
		+	[[Image:\|700\|]]<br />
		+	===CPU Location===
		+
		+	[[Image:\|700\|]]<br />
		+
		+	===RAM Slot Location===
		+
		+	[[Image:\|700\|]]<br />
		+
		+
		+	===Compact Flash Location===
		+
		+	[[Image:\|700\|]]<br />
		+
		+	===Battery Location===
		+	[[Image:\|700\|]]<br />
		+
		+	===Battery Exchange===
		+	1. Press the metal clip back to eject the button battery.
		+	2. Replace it with a new one by pressing the battery with fingertip to restore the battery
		+
		+	===Power Supply Location===
		+	[[Image:\|700\|]]<br />
		+
		+	===Hard Drive Location===
		+	[[Image:\|700\|]]<br />
		+
		+
		+
		+	===Software===
		+	For detailed software configuration, refer to the Router Manual found at wiki.gdc.com.
		+
		+	==Chapter 4: BIOS Settings==
		+
		+	===Start up===
		+	Power on the system, press the <Delete> to run BIOS setup. After you press the <Delete> key, the main BIOS setup menu displays. You can access the other setup screens from the main BIOS setup menu, such as the Chipset and Power menus.
		+
		+	The BIOS setup/utility uses a key-based navigation system called hot keys. Most of the
		+	BIOS setup utility hot keys can be used at any time during the setup navigation process.

Special:Log/upload

2010-09-07T15:33:31Z

uploaded "Image:UBS Connectors.jpg"

Router Manuals/003

2010-09-07T15:32:30Z

Router Connections:

←Older revision		Revision as of 15:32, 7 September 2010
Line 231:		Line 231:
	===Router Connections===		===Router Connections===
	Console port connection:		Console port connection:
		+	#Connect the included RJ-45 to DB9 serial adapter to the PacketMate’s console port.
		+	#Attach the DB9 serial connection to your computer's NULL MODEM cable.
		+	#Configure the computer serial port baud irate to 9600 with bits/parity/stop settings of 8/N/1.
		+
		+	Connecting the front panel Eth0 port:
		+	#Connect a Cat5 cross over cable to the PacketMate’s Eth0 port.
		+	#Connect the opposite end of the cross over cable to another network connecting device.
		+	#Set the connecting device's interface IP address to be in the 10.0.0.0/8 range (Ex: 10.10.199.200).
		+	#Using the Telnet or SSH client of your choice, connect to the IP address 10.10.199.199 on the standard port (We suggest SSH and using PuTTy)
		+
		+	[[Image:LAn_POrt.jpg]]<br />
		+
		+	{\| border="2"
		+	\| '''ACT Status''' \|\| '''Description''' \|\| '''LNK Status''' \|\| '''Description'''
		+	\|-
		+	\| Orange \|\| 10/100 LAN \|\| Yellow \|\| Linked
		+	\|-
		+	\| Green \|\| GbE LAN \|\| Off \|\| Unlinked
		+	\|}
		+
		+	Connections using front panel Ethernet ports:
		+	#Connect the RJ-45 patch cable to the PacketMate’s Ethernet port.
		+	#Connect the opposite end of the patch cable to another network device (router, switch, server, computer, etc.) through its Ethernet port.
		+
		+	Connections using optional cards:<br />
		+	Copper LAN Cards
		+	#Connect the RJ-45 patch cable to the LAN port.
		+	#Connect the opposite end of the patch cable to another network device (router, switch, server, computer, etc.) through its Ethernet port.
		+
		+	Fiber LAN Cards
		+	#Connect the optical fiber connector patch cable to the LAN port.
		+	##Determine if you have singlemode or mutimode fiber.
		+	##Determine the type of connector used in the equipment.
		+	#Connect the opposite end of the patch cable to another network device (router, switch, server, computer, etc.) through its Ethernet port.
		+	WAN Cards
		+	#Connect the RJ-48 patch cable to the WAN port.
		+	##With T1, if connecting directly to another T1 interface, a T1 cross over cable is needed.
		+	##With DS3/E3, connect the Tx on the optional card to the Rx on the network device and the Rx on the optional card, to the Tx on the network device..
		+	#Connect the opposite end of the patch cable to another network device.
		+
		+	Serial WAN Cards
		+	#Connect the DB-9 patch cable to the WAN port.
		+	##With T1, if connecting directly to another T1 interface, a T1 cross over cable is needed.
		+	##With DS3/E3, connect the Tx on the optional card to the Rx on the network device and the Rx on the optional card, to the Tx on the network device..
		+	#Connect the opposite end of the patch cable to another network device.
		+
		+	Voice Cards
		+	#Connect the RJ-45 patch cable to the voice card port.
		+	#Connect the opposite end of the patch cable to another network device.
		+
		+	USB port connections:
		+	USB can connect computer peripherals such as mice, keyboards, digital cameras, printers, personal media players, flash drives, and external hard drives. USB is intended to replace many varieties of serial and parallel ports.
		+
		+	#Connect the male standard A end of the UBS cable to the PacketMate’s UBS port.
		+	#Connect the opposite end of the UBS cable to another device.
		+	[[Image:LAn_POrt.jpg]]<br />

Special:Log/upload

2010-09-07T15:27:16Z

uploaded "Image:LAn POrt.jpg"

Router Manuals/001

2010-09-07T15:11:10Z

Installation Procedures:

←Older revision		Revision as of 15:11, 7 September 2010
Line 202:		Line 202:
	0. Log off		0. Log off

-	Your first step should be to configure the global configuration settings on the router, described in Chapter 4, "Configuring Global Settings: the AAA and Global Configuration Menus" of the Router Manual located at wiki.gdc.com.	+	Your first step should be to configure the global configuration settings on the router, described in Chapter 4, "Configuring Global Settings: the AAA and Global Configuration Menus" of the Router Manual located at http://wiki.gdc.com.


Line 212:		Line 212:

	=====LAN/WAN Port Status=====		=====LAN/WAN Port Status=====
-	From the main menu, choose option 2, "Show interface statius" and press Enter to display PacketMate's real-time "stats" utility. This utility is used to display the current status and default configuration of each port. See Chapter 27, "Understanding The Interface Statistics (stats) Program" of the Router Manual located at wiki.gdc.com for more information about this utility.	+	From the main menu, choose option 2, "Show interface statius" and press Enter to display PacketMate's real-time "stats" utility. This utility is used to display the current status and default configuration of each port. See Chapter 27, "Understanding The Interface Statistics (stats) Program" of the Router Manual located at http://wiki.gdc.com for more information about this utility.

	===Router Connections===		===Router Connections===

Router Manuals/003

2010-09-07T15:09:35Z

Quick Start:

←Older revision		Revision as of 15:09, 7 September 2010
(One intermediate revision not shown.)
Line 217:		Line 217:
	0. Log off		0. Log off

-	Your first step should be to configure the global configuration settings on the router, described in Chapter 4, "Configuring Global Settings: the AAA and Global Configuration Menus" of the Router Manual located at wiki.gdc.com.	+	Your first step should be to configure the global configuration settings on the router, described in Chapter 4, "Configuring Global Settings: the AAA and Global Configuration Menus" of the Router Manual located at http://wiki.gdc.com.


Line 227:		Line 227:

	=====LAN/WAN Port Status=====		=====LAN/WAN Port Status=====
-	From the main menu, choose option 2, "Show interface status" and press Enter to display PacketMate's real-time "stats" utility. This utility is used to display the current status and default configuration of each port. See Chapter 27, "Understanding The Interface Statistics (stats) Program" of the Router Manual located at [wiki.gdc.com] for more information about this utility.	+	From the main menu, choose option 2, "Show interface status" and press Enter to display PacketMate's real-time "stats" utility. This utility is used to display the current status and default configuration of each port. See Chapter 27, "Understanding The Interface Statistics (stats) Program" of the Router Manual located at http://wiki.gdc.com for more information about this utility.

	===Router Connections===		===Router Connections===
	Console port connection:		Console port connection:

←Older revision		Revision as of 17:00, 8 September 2010
Line 2:		Line 2:
	#[[Router_Manuals/001 \| PacketMate 1000]]		#[[Router_Manuals/001 \| PacketMate 1000]]
	#[[Router_Manuals/003 \| PacketMate 1300]]		#[[Router_Manuals/003 \| PacketMate 1300]]
		+	#[[Router_Manuals/004 \| PacketMate 1400]]