User contributions
From ImageStream Router Documentation
(Latest | Earliest) View (newer 20 | older 20) (20 | 50 | 100 | 250 | 500)
- 18:23, 29 November 2006 (diff | hist) N Service-module e1 clock source (New page: ==service-module e1 clock source <internal | <u>line</u>>== ===description=== :Set the clock clock or line sync for an interface ===Parameter=== :''internal - Line sync is provided by the ...)
- 21:24, 28 November 2006 (diff | hist) Frame-relay lmi-type
- 21:17, 28 November 2006 (diff | hist) N Frame-relay lmi-type (New page: ==frame-relay lmi-type ''<<u>ansi</u> | ccitt | cisco>=='' ===Description=== :Set the lmi type for an interface. Valid only in main interface configurations and not in subinterfaces ===Exa...)
- 20:52, 28 November 2006 (diff | hist) N Service-module t3 lbo (New page: ==service-module t3 lbo== ===Description=== :Enable line build-out on the internal CSU. Use only if the cable between your card's TX connector to the demarcation point is greater than 225 ...)
- 20:47, 28 November 2006 (diff | hist) N Service-module e3 lbo (New page: ==service-module e3 lbo== ===Description=== :Enable line build-out on the internal CSU. Use only if the cable between your card's TX connector to the demarcation point is greater than 225 ...)
- 21:42, 27 November 2006 (diff | hist) Command Reference
- 06:26, 27 November 2006 (diff | hist) Command Reference
- 06:15, 27 November 2006 (diff | hist) N X21-clockmode (New page: ==x21-clockmode== ===Description=== :Valid only for cards using an RS422 interface. Setting this clocking option on cards using an RS422 interface and the standard X.21 DB26-DB15 cable dis...)
- 06:13, 27 November 2006 (diff | hist) N Shutdown (New page: ==shutdown== ===Description=== :Shutdown an interface.)
- 06:12, 27 November 2006 (diff | hist) N Pointopoint address (Pointopoint address moved to Pointtopoint address) (top)
- 06:12, 27 November 2006 (diff | hist) m Pointtopoint address (Pointopoint address moved to Pointtopoint address)
- 06:09, 27 November 2006 (diff | hist) Command Reference
- 05:59, 27 November 2006 (diff | hist) Pointtopoint address
- 05:58, 27 November 2006 (diff | hist) N Pointtopoint address (New page: ==bandwidth ''<IPV4_Address>''== ===Description=== :Configure the destination address for this interface. For use with PPP connections when the destination router will not negotiate this s...)
- 05:57, 27 November 2006 (diff | hist) N Bandwidth (→bandwidth ''<bits_per_second>'')
- 05:47, 27 November 2006 (diff | hist) N Command Reference
- 05:46, 27 November 2006 (diff | hist) N Mtu (New page: ==mtu ''<MTU_Size>'' ''<1 | <u>2</u> | 3 | 4 | 5 | 6 | 7 | 8 | 9>''== ===Description=== :Configure the maximum transfer unit size for this interface. 800 series cards default to 4470 byte ...)
- 05:46, 27 November 2006 (diff | hist) N Debug (→debug ''<hardware | protocol>'' ''<1 | <u>2</u> | 3 | 4 | 5 | 6 | 7 | 8 | 9>'')
- 03:27, 26 November 2006 (diff | hist) Router Documentation (Replacing page with 'The [FullReference] is not complete.')
- 03:26, 26 November 2006 (diff | hist) N Router Documentation
(Latest | Earliest) View (newer 20 | older 20) (20 | 50 | 100 | 250 | 500)
