Router Installation and Configuration Manual/RADIUS Supported Attributes

From ImageStream Router Documentation

< Router Installation and Configuration Manual
Revision as of 19:27, 7 July 2009 by Syoder (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Authentication requests accept the following attributes:

  • AscendDataRate: Customer's download speed in bits per second
  • AscendXmitRate: Customer's upload speed in bits per second
  • FramedIPAddress: IP address to assign to client.
  • FramedIPNetmask: Netmask to assign to the router's PPP interface - this subnet is routed to customer
  • FramedMTU: MTU to use on the router's PPP interface
  • FramedRoute: Add these routes to the customer

Authentication requests send the folowing attributes:

  • NASIdentifier: router's hostname
  • NASPort: Encoded as Serial Port#/VPI/VCI like Cisco does for ATM and the pppN device number for Ethernet and L2TP.
  • NASPortType: Virtual
  • CallingStationID: Ethernet MAC address for PPPoE on ethernet and ATM, not set for PPPoA or L2TP.

Accounting requests send the following attributes:

  • UserName: User name
  • AcctSessionID: Process ID of ppp process (unique)
  • NASIdentifier: router's hostname
  • NASPort: Encoded as Serial Port#/VPI/VCI like Cisco does for ATM and the pppN device number for Ethernet and L2TP.
  • NASPortType: Virtual
  • CallingStationID: Ethernet MAC address for PPPoE on ethernet and ATM, not set for PPPoA or L2TP.
  • FramedIPAddress: Actual IP address given to client.
  • AcctInputOctets: Number of bytes received from client.
  • AcctOutputOctets: Number of bytes sent to client.
  • AcctSessionTime: Number of seconds the client was connected.
Personal tools
Router software releases