Router Installation and Configuration Manual/RADIUS Supported Attributes

From ImageStream Router Documentation

(Difference between revisions)
Jump to: navigation, search
(New page: ===Authentication requests accept the following attributes:=== *AscendDataRate: Customer's download speed in bits per second *AscendXmitRate: Customer's upload speed in bits per second *Fr...)
(Authentication requests accept the following attributes:)
Line 6: Line 6:
*FramedMTU: MTU to use on the router's PPP interface
*FramedMTU: MTU to use on the router's PPP interface
*FramedRoute: Add these routes to the customer
*FramedRoute: Add these routes to the customer
 +
*Class: Accounting class parameter
 +
*Session-Timeout: Session time limit in seconds
 +
*Idle-Timeout: Idle timeout in seconds
===Authentication requests send the folowing attributes:===
===Authentication requests send the folowing attributes:===

Revision as of 19:52, 17 September 2009

Authentication requests accept the following attributes:

  • AscendDataRate: Customer's download speed in bits per second
  • AscendXmitRate: Customer's upload speed in bits per second
  • FramedIPAddress: IP address to assign to client.
  • FramedIPNetmask: Netmask to assign to the router's PPP interface - this subnet is routed to customer
  • FramedMTU: MTU to use on the router's PPP interface
  • FramedRoute: Add these routes to the customer
  • Class: Accounting class parameter
  • Session-Timeout: Session time limit in seconds
  • Idle-Timeout: Idle timeout in seconds

Authentication requests send the folowing attributes:

  • NASIdentifier: router's hostname
  • NASPort: Encoded as Serial Port#/VPI/VCI like Cisco does for ATM and the pppN device number for Ethernet and L2TP.
  • NASPortType: Virtual
  • CallingStationID: Ethernet MAC address for PPPoE on ethernet and ATM, not set for PPPoA or L2TP.

Accounting requests send the following attributes:

  • UserName: User name
  • AcctSessionID: Process ID of ppp process (unique)
  • NASIdentifier: router's hostname
  • NASPort: Encoded as Serial Port#/VPI/VCI like Cisco does for ATM and the pppN device number for Ethernet and L2TP.
  • NASPortType: Virtual
  • CallingStationID: Ethernet MAC address for PPPoE on ethernet and ATM, not set for PPPoA or L2TP.
  • FramedIPAddress: Actual IP address given to client.
  • AcctInputOctets: Number of bytes received from client.
  • AcctOutputOctets: Number of bytes sent to client.
  • AcctSessionTime: Number of seconds the client was connected.
Personal tools
Router software releases