Add-On Packages/Setup

:Enter the following commands from the command prompt (Main menu option 3 Advanced  -> option 1 Bash shell)
:*addon_hd configure
:*addon_hd partition
:*addon_hd format
:*Enable addon_hd
:*Start addon_hd

The addon_hd service creates 2 partitions. A read-only partition for program installation is mounted by default on /opt. A read-write partition for data storage is mounted on /data.

The addon_hd service can be configured to run on the built-in flash if it is 128 MB or larger. Otherwise an extra flash drive or hard drive is required.

==Partitioning schemes==

{| class="wikitable" border=1
 |-
 !Device
 !RO Partition
 !RO Size
 !RO Mount Point
 !RW Partition
 !RW Size
 !RW Mount point
 |-
 | Built-in 128 MB Flash
 | hda3
 | 32 MB
 | /opt
 | hda4
 | Remainder of drive (24 MB for 128 MB flash)
 | /data
 |-
 | Add-on Flash or Hard Drive Less than 8 GB
 | hdc1
 | 512 MB
 | /opt
 | hdc2
 | Remainder of drive
 | /data
 |-
 | Add-on Flash or Hard Drive Greater than 8 GB
 | hdc1
 | 4 GB
 | /opt
 | hdc2
 | Remainder of drive
 | /data
 |-

|}